ElectronicsInstalled SoundLive Sound

iKON iK42

Four-channel 20,000W Class D Power Amplifier

Martin Audio iKON iK42 - High Power, Four-Channel Class D Amplifier
Where to Buy or Rent

The iKON iK42 is an advanced 4-channel power amplifier which combines very high power density with superb audio performance, state-of-the-art DSP and network control. A dedicated controller amplifier for Martin Audio Wavefront Precision line arrays and XE Series stage monitors, the iK42 can also provide multi-channel amplification across the Martin Audio loudspeaker range.

Features

  • Four channels of efficient Class D amplification
  • Very high power density in 2U rack height
  • Up to 20,000 Watts total power output, depending on load impedance
  • High performance 96kHz DSP on all inputs and outputs (48kHz on outputs when implementing FIR filters)
  • Switch mode power supply
  • Global mains operation, 85V to 240V auto-sensing
  • Intuitive, user-friendly, front panel interface
  • Analogue, AES3 and Dante™ digital audio network inputs
  • Ethernet network for system operation, control and monitoring via Martin Audio VU-NET™ software
  • Comprehensive protection and monitoring functions

Applications

  • Dedicated controller amplifier for Wavefront Precision Series, XE Monitor Series, FlexPoint and TORUS systems
  • Versatile multi-channel amplification for Martin Audio loudspeaker systems

The iK42 can deliver a full 5000 watts per channel into 2Ω with all channels driven while remaining highly efficient. Its high efficiency reduces the energy drawn from the mains supply and ensures the power reserves needed to deliver superb sound under arduous live conditions.

Martin Audio iKON iK42 | High Power, Four-Channel Class D Amplifier

Ethernet is used for system remote control and monitoring via Martin Audio’s VU-NET software application, while a user friendly front panel interface allows full local control of all features. Dante digital audio network inputs are also provided for digital audio distribution and control.

Powerful DSP is fully integrated into the iK42 to provide a multitude of features that ensure maximum performance of performance for XE monitors, TORUS and FlexPoint systems. It also provides up to 1000 FIR filter taps @ 48kHz on each output channel, which is essential to implement DISPLAY’s wide bandwidth optimisation process in Wavefront Precision line array systems.

The iK42 employs comprehensive protection functions to maintain safe operating conditions of both the amplifier and the loudspeakers driven — including a sophisticated loudspeaker limiter suite which incorporates peak, RMS and excursion limiting, as well as multiband limiting for passive 2-way systems.

Links
User guide Electronics Brochure Datasheet
Specification
General
TYPEFour-channel Class D amplifier
POWER OUTPUT (*)
  • 5000W into 2Ω
  • 3000W into 4Ω
  • 1500W into 8Ω
  • 750W into 16Ω
  • 10000W bridged per channel pair, 4Ω
  • 6000W bridged per channel pair, 8Ω
CV LINE OUTPUT (*)
  • 1250W, 25V line
  • 3500W, 70V line
  • 5000W, 100V line
DIGITAL SIGNAL PROCESSING96kHz/48kHz DSP on all inputs and outputs
COOLINGDual vari-speed fans, front-to-back airflow
MAXIMUM AMBIENT TEMPERATURE40°C (104°F)
Audio Inputs/Outputs
ANALOGUE IN/LINK (4 CHANNELS)
  • 4 x female
  • 4 x male Neutrik™ XLR
ANALOGUE INPUT IMPEDANCE20kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL+20dBu
AES3 IN/LINK (2 CHANNELS)1 x female, 1 x male Neutrik™ XLR, balanced
DANTE™ (4 CHANNELS) 2 x shielded RJ45, primary and secondary
AMPLIFIER OUTPUTS4 x Neutrik Speakon™ NL4
Audio Performance
DYNAMIC RANGE
  • >113dBA, analogue input
  • >114dBA AES/Dante™ input
FREQUENCY RESPONSE7Hz-30kHz (‐2.5dB points, 4Ω load)
TOTAL HARMONIC DISTORTION<0.05% typical @ 1kHz, 4Ω load
SLEW RATE>60V per microsecond
DAMPING FACTOR>800 at amplifier output, ref 8Ω
Control and Monitoring Network
PROTOCOLEthernet
CONTROL APPLICATIONMartin Audio VU-NET™
Digital Signal Processing
SAMPLE RATE 96kHz (48kHz for FIR filter implementation)
PHYSICAL INPUTS
  • 4 x analogue
  • 1 x AES pair with link output
  • 4 x Dante™ inputs routable to four DSP drive modules
DRIVE MODULE INPUT DSPInput signal routing, delay, gain, HPF, Phase, Mute
EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters
DRIVE MODULE OUTPUT DSPSource, delay, gain, Phase, Mute, crossover filters, limiters
EQ: low shelf, 8 x PEQ / band pass and shelving filters
Power Supply
TYPEHigh performance Series Resonant
AC INPUT OPERATING RANGE85 – 240V ~ AC, 47 - 63Hz
MAINS INRUSH CURRENT6A at 115V, 12A at 230V (max for <10ms)
MAINS CONNECTORNeutrik 32A Powercon™
Physical
DIMENSIONS(W) 482 x (H) 2U/88mm x (D) 441mm
(W) 18.98in x (H) 2U/3.46in x (D) 17.35in
(incl handles and optional rear support)
WEIGHT12.5kg (27.5lbs)
Loudspeaker Compatibility

 

 

16 Ω

8 Ω

4 Ω

2 Ω

8 Ω Bridged

4 Ω Bridged

750w

1500w

3000w

5000w

6000w

10000w

CDD

 

CDD5

N/A

N/A

N/A

CDD6

N/A

N/A

N/A

CDD8

N/A

N/A

N/A

CDD10

N/A

N/A

N/A

CDD12

N/A

N/A

N/A

CDD15

N/A

N/A

N/A

FlexPoint

FP4

N/A

N/A

FP6

N/A

N/A

FP8

N/A

N/A

N/A

FP12

N/A

N/A

N/A

FP15

N/A

N/A

N/A

LE Monitors

LE100

N/A

N/A

N/A

LE200

N/A

N/A

N/A

O-LINE

O-Line

N/A

N/A

SX Subwoofers

SX110

N/A

N/A

N/A

SX210

N/A

N/A

N/A

SX112

N/A

N/A

N/A

SX212

N/A

N/A

N/A

N/A

SX115

N/A

-1.1dB

SXC(F)115

N/A

-1.2dB

-1.2dB

SX215

N/A

N/A

-0.3dB

-1.1dB

N/A

SX118

N/A

-1.2dB

-1.2dB

SXC(F)118

N/A

-1.2dB

-1.2dB

SX218

N/A

-1.2dB

-1.2dB

SXH(F)218

N/A

N/A

-3dB

N/A

TH Series

THS

N/A

-0.2dB

-0.3dB

-1.1dB

N/A

N/A

THH(V)

N/A

-0.8dB

N/A

N/A

TORUS

T8

N/A

N/A

N/A

T12

N/A

N/A

N/A

Wavefront Precision

WPM

N/A

N/A

WPS

N/A

N/A

N/A

N/A

WPC

N/A

N/A

N/A

N/A

WPL

N/A

N/A

N/A

N/A

XE Monitors

XE300

N/A

N/A

N/A

XE500

N/A

N/A

N/A

N/A

Architectural Specs
iKON iK42

The amplifier shall provide four channels of Class D amplification with 96kHz DSP (Digital Signal Processing) on all inputs and outputs. It shall have both analogue and AES3 digital inputs and shall incorporate capabilities for remote system control and monitoring via Ethernet. A front panel user interface with a backlit display shall provide local control.

It shall be equipped with four analogue input connectors, four analogue link connectors, a dual-channel AES3 input connector and a dual-channel AES3 link connector, as well as an Ethernet port. Dante™ digital audio network primary and secondary connectors shall also be provided for digital audio distribution and control. Four output connectors shall be of the Neutrik Speakon™ NL4 type, with output duplication within two connectors to facilitate bi-amp operation with a 4-core cable.

Analog inputs shall each have an input impedance of 20kΩ, electronically balanced to ground.

The amplifier shall be equipped with a switch mode power supply with auto-sensing global mains operation from 85 -240 V AC, 47 - 63Hz. Dual vari-speed fans with front-to-back airflow shall be employed for cooling and the amplifier shall incorporate comprehensive monitoring and protection functions to maintain safe operating conditions of both itself and the loudspeaker systems driven.

The output power shall be 4 x 5000W into 2 ohms with a crest factor of 4 (12dB), 4 x 3000W into 4 ohms with a crest factor of 2.8 (9dB) and 4 x 1500W into 8 ohms with a crest factor of 2 (6dB), all channels driven.

Dimensions (W x H x D) shall be 483mm x 2U/89mm x 357mm (19in x 2U/3.5in x 14.1in). Weight shall be 12.5kg (27.5lbs).

The amplifier shall be the Martin Audio iKON iK42.

Technical Drawings & 3D Models
Martin AudioiKON iK42 Tech Drawing

All information is Copyright. Martin Audio Ltd.

Technical Drawings for iKON iK42

JPEG DWG PDF

 

3D SketchUp Models for iKON iK42

none currently available

 

Revit File 

none currently available

Accessories
IK42RACK02-UK.Amplifier rackfor iK42
IK42RACK02-UK.Amplifier rackfor iK42

IK42RACK02-UK

Amplifier rack
for iK42

IK42RACK02-US.Amplifier rackfor iK42
IK42RACK02-US.Amplifier rackfor iK42

IK42RACK02-US

Amplifier rack
for iK42

IK42DIST32UK.Distro for iK42ROW version
IK42DIST32UK.Distro for iK42ROW version

IK42DIST32UK

Distro for iK42
ROW version

IK42DIST32UK+.Distro for iK42 and iK41ROW version
IK42DIST32UK+.Distro for iK42 and iK41ROW version

IK42DIST32UK+

Distro for iK42 and iK41
ROW version

IK42DIST32US.Distro for iK42US version
IK42DIST32US.Distro for iK42US version

IK42DIST32US

Distro for iK42
US version

IK42DIST32US+.Distro for iK42 and iK41US version
IK42DIST32US+.Distro for iK42 and iK41US version

IK42DIST32US+

Distro for iK42 and iK41
US version

RACKKITC.Rear rack ears for usewith IKON Series amplifiers
RACKKITC.Rear rack ears for usewith IKON Series amplifiers

RACKKITC

Rear rack ears for use
with IKON Series amplifiers

AMPRACK9UUK.9U amplifier rackfor iK amplifiers
AMPRACK9UUK.9U amplifier rackfor iK amplifiers

AMPRACK9UUK

9U amplifier rack
for iK amplifiers

INDIST1U+.Distro panel foriKON amplifier racks
INDIST1U+.Distro panel foriKON amplifier racks

INDIST1U+

Distro panel for
iKON amplifier racks

PWA00238.0.4m NL4 biamp link 2.5mm cablefor full range enclosures
PWA00238.0.4m NL4 biamp link 2.5mm cablefor full range enclosures

PWA00238

0.4m NL4 biamp link 2.5mm cable
for full range enclosures

PWA00239.1m NL4 biamp link 4mm cablefor Subwoofers
PWA00239.1m NL4 biamp link 4mm cablefor Subwoofers

PWA00239

1m NL4 biamp link 4mm cable
for Subwoofers

PWA00240.15m NL4 biamp 4mm cablefor Subwoofers
PWA00240.15m NL4 biamp 4mm cablefor Subwoofers

PWA00240

15m NL4 biamp 4mm cable
for Subwoofers

PWA00241.20m NL4 biamp 2.5mm cablefor for full range enclosures
PWA00241.20m NL4 biamp 2.5mm cablefor for full range enclosures

PWA00241

20m NL4 biamp 2.5mm cable
for for full range enclosures

PWA00242.M Soca 8 way to 8 2 pole NL4for use with 8 circuits of WPM
PWA00242.M Soca 8 way to 8 2 pole NL4for use with 8 circuits of WPM

PWA00242

M Soca 8 way to 8 2 pole NL4
for use with 8 circuits of WPM

PWA00243.M Soca to 4 x biampNL4 5m tails
PWA00243.M Soca to 4 x biampNL4 5m tails

PWA00243

M Soca to 4 x biamp
NL4 5m tails

PWA00244.M Soca to 2 x NL81m
PWA00244.M Soca to 2 x NL81m

PWA00244

M Soca to 2 x NL8
1m

PWA00245.NL8 to 4 x NL4 15mwith 2m breakout
PWA00245.NL8 to 4 x NL4 15mwith 2m breakout

PWA00245

NL8 to 4 x NL4 15m
with 2m breakout

PWA00246.15m SocaMale to Female
PWA00246.15m SocaMale to Female

PWA00246

15m Soca
Male to Female

ASF140203.8 Port Rack MountNetwork Switch
ASF140203.8 Port Rack MountNetwork Switch

ASF140203

8 Port Rack Mount
Network Switch

PWA0067.Cat 5 cable0.5m
PWA0067.Cat 5 cable0.5m

PWA0067

Cat 5 cable
0.5m

Available in this Series

How Can We Help?

If you have an audio project, whether that’s a Live Event or an Installation, and would like some expert advice or interested in a demo, please register your details

Get Project Advice
Return to Site

All material © 2023.
Copyright Martin Audio Ltd.
Subject to change without notice.
Martin Audio Ltd. Reg. No. 4824341

Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.
v2023:1.0